Small tense fix

[infoex-autowx.git] / README.md

diff --git a/README.md b/README.md
index e4502750d602210db93af5512da6b79e43d87842..3b442b56627a1541eab02fda9161885b43c2991d 100644 (file)
--- a/README.md
+++ b/README.md
@@ -5,7 +5,7 @@ This program fetches data from an NRCS SNOTEL or MesoWest station and
 pushes it into the InfoEx system using the new automated weather system
 implementation.
 
 pushes it into the InfoEx system using the new automated weather system
 implementation.
 

-License under the ISC license (see file: LICENSE).
+Licensed under the ISC license (see file: LICENSE).

 
 Disclaimer
 ----------
 
 Disclaimer
 ----------


@@ -38,11 +38,16 @@ importation of data into your InfoEx subscriber account.
 To run ad-hoc (be sure to activate the virtual environment, as detailed in the
 Installation section):
 
 To run ad-hoc (be sure to activate the virtual environment, as detailed in the
 Installation section):
 

-`./infoex-autowx.py --config [path/to/config-file.ini] [--dry-run]`
+`./infoex-autowx.py --config path/to/config-file.ini [--dry-run] [--log-level debug|info|warning]`

 
 **NOTE: Specifying --dry-run will also not clean up the generated CSV
 file.** This is so that you can debug any issues more easily.
 
 
 **NOTE: Specifying --dry-run will also not clean up the generated CSV
 file.** This is so that you can debug any issues more easily.
 

+You can also specify `--log-level` as debug, info, warning. The
+resultant log messages will try to be logged to journald, but if that's
+not available, they will be printed to stdout. This output can be
+helpful early on in the setup process.
+

 Here's an example of a crontab(5) with two SNOTEL sites, each of which
 will run once per hour (note that this will activate the virtual environment
 created earlier):
 Here's an example of a crontab(5) with two SNOTEL sites, each of which
 will run once per hour (note that this will activate the virtual environment
 created earlier):


@@ -178,6 +183,47 @@ indicates that I'd like to import "Temperature" and "Precipitation
 accumulated" from the MesoWest station at Santiam Pass, OR, into InfoEx,
 and that I want that data in imperial units.
 
 accumulated" from the MesoWest station at Santiam Pass, OR, into InfoEx,
 and that I want that data in imperial units.
 

+A note on supported measurements
+--------------------------------
+
+While this program supports several measurements, and will faithfully
+request all of the ones you specify (provided they're supported), the
+weather station may not record them. In this case, the data will simply
+be ignored (i.e. it will NOT log "0" when there's no measurement
+available).
+
+
+InfoEx provides a mechanism for inspecting your automated weather
+station data, so use that after setting this program up and compare it
+with the data you see in your web browser.
+
+Here's the list of measurements currently supported:
+
+**NRCS:**  
+PREC  
+TOBS  
+SNWD  
+PRES  
+RHUM  
+WSPD  
+WDIR  
+
+**MesoWest:**  
+precip\_accum  
+air\_temp  
+snow\_depth  
+pressure  
+relative\_humidity  
+wind\_speed  
+wind\_direction  
+wind\_gust  
+
+Future plans
+------------
+
+- Improve the documentation
+- Implement unit conversion for NRCS stations
+

 Version history
 ---------------
 
 Version history
 ---------------
 


@@ -189,6 +235,12 @@ Version history
   hence the major version bump. Such changes are not taken lightly but
   given the desire to support multiple data sources, were necessary.
 
   hence the major version bump. Such changes are not taken lightly but
   given the desire to support multiple data sources, were necessary.
 

+  Other minor changes include:
+
+  - New switches: --log-level and --version.
+  - Better documentation.
+  - Expanded supported measurement types (from three to eight, in number).
+

 - 1.0.0 (Jun 2020)
 
   First released version. Cleaned up the program and design.
 - 1.0.0 (Jun 2020)
 
   First released version. Cleaned up the program and design.