InfoEx AutoWx (IEAW)
=============
-This program fetches data from an NRCS SNOTEL or MesoWest station and
-pushes it into the InfoEx system using the new automated weather system
-implementation.
+This program fetches data from an NRCS SNOTEL or MesoWest station, or
+your own custom data source, and pushes it into the InfoEx system using
+the new automated weather system implementation.
-License under the ISC license (see file: LICENSE).
+Licensed under the ISC license (see file: LICENSE).
Disclaimer
----------
or MesoWest weather station from which you'd like to automate the
importation of data into your InfoEx subscriber account.
+To get started, copy the included example config file
+(`config.ini.example` in the root source directoy) and modify the values
+for your own use.
+
To run ad-hoc (be sure to activate the virtual environment, as detailed in the
Installation section):
-`./infoex-autowx.py --config [path/to/config-file.ini] [--dry-run]`
+`./infoex-autowx.py --config path/to/config-file.ini [--dry-run] [--log-level debug|info|warning]`
+
+**NOTE: Specifying --dry-run will not clean up the generated CSV file.**
+This is so that you can more easily debug any issues that arise in the
+setup process.
-**NOTE: Specifying --dry-run will also not clean up the generated CSV
-file.** This is so that you can debug any issues more easily.
+You can also specify `--log-level` as debug, info, warning. The
+log messages produced by the program will try to be logged to journald,
+but if that's not available, they will be printed to stdout. This output
+can be helpful early on in the setup process.
+
+Automation
+----------
Here's an example of a crontab(5) with two SNOTEL sites, each of which
will run once per hour (note that this will activate the virtual environment
options.
`[station]`
-`type = # either mesowest or nrcs #`
-`token = # MesoWest API token -- ignored when type is nrcs #`
+`type = # mesowest, nrcs, or python #`
+`token = # MesoWest API token -- only applies when type is mesowest #`
`station_id = # the NRCS/MesoWest identifier for a particular station #`
`desired_data = # a comma-delimited list of fields you're interested in #`
-`units = # either english or metric -- ignored when type is nrcs #`
+`units = # either english or metric -- only applies when type is mesowest #`
+`tz = # any entry from the Olson tz database e.g. America/Denver #`
+`path = # the filesystem path to the Python program -- only applies when type is python #`
`[infoex]`
`host = # InfoEx FTP host address #`
"elementCd" values into a comma-delimited string and put that into your
configuration file as the `desired_data` value.
-A complete example:
+A complete [station] section example:
`[station]`
`type = nrcs`
https://developers.synopticdata.com/about/station-variables/
-The MesoWest API supports on-the-fly unit conversion, so that can be
-specified to infoex-autowx via the configuration option `units`. This
-can be either 'english' or 'metric', with 'english' meaning imperial
-units as used in the United States.
+The MesoWest API supports on-the-fly unit conversion. If desired, that
+can be specified to infoex-autowx via the configuration option `units`.
+This can be either 'english' or 'metric', with 'english' meaning
+imperial units as used in the United States.
-A complete example:
+A complete [station] section example:
`[station]`
`type = mesowest`
accumulated" from the MesoWest station at Santiam Pass, OR, into InfoEx,
and that I want that data in imperial units.
+Custom weather station support
+------------------------------
+
+This program supports custom weather station data by allowing the user
+to specify the path to an external Python program. The external Python
+program should emit its data in the form expected by infoex-autowx.
+
+This is a powerful feature which enables the user to upload data from
+any source imaginable into InfoEx. Common examples are a local database
+or a remote web page which requires some custom parsing.
+
+Please see the program located at examples/custom-wx.example.py for a
+complete description of what's required.
+
+A note on time zones
+--------------------
+
+This program is aware of time zones via the pytz library. The way in
+which NRCS and MesoWest deal with time zones differs as follows:
+
+NRCS expects the request to come in the appropriate time zone, and the
+data retrieved will be in the same time zone (no transformation
+required before sending to InfoEx).
+
+MesoWest expects the request to come in UTC, and the data retrieved will
+be in the same time zone (transformation from UTC to the desired time
+zone is required before sending to InfoEx).
+
+As long as you specify the correct timezone in your configuration file,
+all will be handled correctly. The list of time zones comes from the
+Olson tz database. See that for more information.
+
+If you specify an invalid time zone, the program will exit and inform
+you of such.
+
+Lastly, InfoEx itself is timezone aware. If you notice that the data
+which makes it into your operation is inaccurate, start your
+investigation with time zone-related issues and move on only once you've
+ruled this out as a cause of the inaccuracy.
+
+Unit conversions
+----------------
+
+Desired units may be specified in the configuration file.
+
+For MesoWest, the desired unit will be passed along in the API request
+and the conversion will take place through the MesoWest/Synoptic API.
+
+For NRCS, this program will do the conversion manually, as NRCS does not
+permit specifying the desired unit.
+
A note on supported measurements
--------------------------------
be ignored (i.e. it will NOT log "0" when there's no measurement
available).
-
InfoEx provides a mechanism for inspecting your automated weather
station data, so use that after setting this program up and compare it
with the data you see in your web browser.
Here's the list of measurements currently supported:
-precipitationGauge
-tempPres
-hS
-baro
-rH
-windSpeedNum
-windDirectionNum
-windGustSpeedNum (only supported by MesoWest)
-
-Future plans
-------------
-
-- Improve the documentation
-- Implement unit conversion for NRCS stations
+**NRCS:**
+PREC
+TOBS
+SNWD
+PRES
+RHUM
+WSPD
+WDIR
+
+**MesoWest:**
+precip\_accum
+air\_temp
+snow\_depth
+pressure
+relative\_humidity
+wind\_speed
+wind\_direction
+wind\_gust
+
+**Custom Wx program**
+*infoex-autowx expects a custom Wx data provider to provide at least one
+of the following:*
+precipitationGauge
+tempPres
+tempMaxHour
+tempMinHour
+hS
+baro
+rH
+windSpeedNum
+windDirectionNum
+windGustSpeedNum
Version history
---------------
+- 3.2.4 (Mar 2021)
+
+ Fix a small bug that allowed MesoWest HS values to flow through in
+ millimeters when metric was the specified unit. MesoWest metric HS
+ values are now correctly in centimeters.
+
+- 3.2.3 (Feb 2021)
+
+ Fix a small bug that allowed a TypeError to be raised with some
+ regularity.
+
+- 3.2.2 (Feb 2021)
+
+ Various small fixes.
+
+ - Round precipitation accumulation values to 2 decimal places.
+ - Catch requests' ConnectionException.
+ - Improve logging output when using stdout.
+
+- 3.2.1 (Feb 2021)
+
+ Fix config validation bug with units and custom Python program.
+
+- 3.2.0 (Feb 2021)
+
+ Implement NRCS unit conversion.
+
+- 3.1.1 (Feb 2021)
+
+ Fix relative humidity rounding.
+
+- 3.1.0 (Jan 2021)
+
+ Implement time zone support.
+
+- 3.0.2 (Jan 2021)
+
+ Use UTC time when asking MesoWest for data.
+
+- 3.0.1 (Jan 2021)
+
+ General fixes.
+
+ - MesoWest wind data (speed and gust speed) units are now transformed
+ from their origin unit (meters per second) to the unit expected by
+ InfoEx (miles per hour).
+
+ - Relative humidity is now rounded to one decimal place, preventing
+ InfoEx from reddening the auto-filled value.
+
+- 3.0.0 (Nov 2020)
+
+ Implement Custom Wx data providers.
+
+ This release enables the user to write their own Python programs and
+ specify them to infoex-autowx as a data provider.
+
+ This in turn enables the user to pull data from e.g. a local database
+ or an HTML page and push it into their InfoEx auto station data,
+ limited only by the imagination.
+
+- 2.2.0 (Nov 2020)
+
+ Add support for Tmin/Tmax values (directly from MesoWest/NRCS).
+
+- 2.1.0 (Nov 2020)
+
+ Adjust precision of certain values before sending them to InfoEx.
+
+- 2.0.2 (Jul 2020)
+
+ Fix issues shown by pylint(1).
+
+- 2.0.1 (Jul 2020)
+
+ Major restructuring, but nothing which should impact the end user.
+
+ - Took the monolithic main () routine and broke it out into logical
+ components.
+ - Improved the names of variables.
+
- 2.0.0 (Jul 2020)
Implement MesoWest integration.
hence the major version bump. Such changes are not taken lightly but
given the desire to support multiple data sources, were necessary.
+ Other minor changes include:
+
+ - New switches: --log-level and --version.
+ - Better documentation.
+ - Expanded supported measurement types (from three to eight, in number).
+
- 1.0.0 (Jun 2020)
First released version. Cleaned up the program and design.
wylark / infoex-autowx.git / blobdiff